Dansensor MAP Mix Focus 2 and 3 Gas Mixer
Mid-Range Capacity Mixers using the most Advanced Mixing Technology
The Dansensor MAP Mix Focus, in 2 and 3 gas mix versions, offers a cost effective, mid-range, capacity mixer. Developed with a high level of mix accuracy, using the experience gained from producing the high capacity MAP Mix Provectus and the use of Mass Flow Controllers.
The Dansensor MAP Mix Focus is universally suitable for both buffer tank & flow applications. It offers users full flexibility and redundancy across a site’s fleet of packaging lines.
The MAP Mix Focus is oxygen safe throughout. It will safely mix any combination of nitrogen, oxygen, carbon dioxide and atmospheric air. For ease of installation, any gas can be connected to any inlet port.
Consistent gas mix. During the working day, it is inevitable that supply gas pressures fluctuate. However, the technology of the MAP Mix Focus, ensures delivery of a consistent gas mix, regardless of those fluctuations. This removes the need for operators to repeatedly adjust the mixer settings in order to maintain the correct headspace gas mix in the pack.
Mass Flow Meters accurately measure the volumes of the in-feed gasses from input gas pressures between 2.1 – 10.0 bar. This is a significant advance on the old technology of traditional mixers, where any inconsistency in the input gas pressures can cause disruption to production, slower running and quality issues.
Maximum Output Volumes
To achieve maximum output volumes, all input gas pressures should be at 6.0 bar or above. At that level, the maximum volumes of mixed gas for the most common mix ratios are:
Mix Ratios 80% / 20% 70% / 30%
2 Gas MAP Mix Focus 312 L/min 350 L/min
3 Gas MAP Mix Focus 625 L/min 710 L/min
When higher output volumes are required, the three gas version of the Dansensor MAP Mix Focus can deliver twice the output of a two gas version. This is achieved by connecting the gas of the larger ratio onto two of the three inlet ports. The MAP Mix Focus then automatically performs the calculations.
|Any mix of dry oxygen, carbon dioxide, or nitrogen, or air (0°C to +50°C gas temperature)
|Gas inlet pressure
|2.1 – 10.0 bar, depending on back pressure and flow
|Example: 1 bar at 10 bar input pressure
|Gas flow per gas string
|6 – 250 l/min
|Output gas flow
|Total output flow up to: 500 l/min (2-gas) and 750 l/min (3-gas) depending on mixture setting
|Range 0%, 2% – 100%
|+/- 2% absolute in flow ranges above 50 l/min total output flow
|Total and daily consumption
|Buffer or flow configuration, selectable in MAP Mix Focus software and by installation
Additional Benefits for Dansensor MAP Mix Focus Installations:
For ease of installation, we also offer:
- Fittings Kits – N2/CO2 version & O2 version
- On site installation & training by our installation engineers
To get the most from a MAP Mix Focus, we offer the following options:
- IP 54 Stainless Steel Enclosure for use in both wet & dusty environments
- Warranty Upgrade
- Annual Service Contracts and Preventative Maintenance Contracts.
MAP Mix Focus or MAP Mix Provectus – which best suits your requirement?
|MAP Mix Focus
|MAP Mix Provectus
|Low/mid-range volumes of mixed gas (750L/min)
|Mid/high volumes of mixed gas (1500L/min)
|Communication with the online gas analyser Dansensor MAP Check 3
|Requires upgrade of MAP Check 3 to GasSave version
|No download capability
|Automatic download via RS232, USB and LAN ports
|Communication with the packaging machine
|No communication capability
|2-way communication via the SDK Kit
|Approx 75% cost of MAP Mix Provectus
Contact Our Sales Team
Call 01223 492083 or email firstname.lastname@example.org