Dansensor MAP Mix Focus 2 and 3 Gas Mixer

Mid-Range Capacity Mixers using the most Advanced Mixing Technology

The Dansensor MAP Mix Focus, in 2 and 3 gas mix versions, offers a cost effective, mid-range, capacity mixer. Developed with a high level of mix accuracy, using the experience gained from producing the high capacity MAP Mix Provectus and the use of Mass Flow Controllers.

The Dansensor MAP Mix Focus is universally suitable for both buffer tank & flow applications. It offers users full flexibility and redundancy across a site’s fleet of packaging lines.

The MAP Mix Focus is oxygen safe throughout. It will safely mix any combination of nitrogen, oxygen, carbon dioxide and atmospheric air. For ease of installation, any gas can be connected to any inlet port.

Consistent gas mix. During the working day, it is inevitable that supply gas pressures fluctuate. However, the technology of the MAP Mix Focus, ensures delivery of a consistent gas mix, regardless of those fluctuations. This removes the need for operators to repeatedly adjust the mixer settings in order to maintain the correct headspace gas mix in the pack.

Mass Flow Meters accurately measure the volumes of the in-feed gasses from input gas pressures between 2.1 – 10.0 bar. This is a significant advance on the old technology of traditional mixers, where any inconsistency in the input gas pressures can cause disruption to production, slower running and quality issues.

Maximum Output Volumes
To achieve maximum output volumes, all input gas pressures should be at 6.0 bar or above. At that level, the maximum volumes of mixed gas for the most common mix ratios are:

Mix Ratios                                        80% / 20%         70% / 30%
2 Gas MAP Mix Focus                    312 L/min            350 L/min
3 Gas MAP Mix Focus                    625 L/min            710 L/min

When higher output volumes are required, the three gas version of the Dansensor MAP Mix Focus can deliver twice the output of a two gas version. This is achieved by connecting the gas of the larger ratio onto two of the three inlet ports. The MAP Mix Focus then automatically performs the calculations.

Additional Benefits for Dansensor MAP Mix Focus Installations:
For ease of installation, we also offer:

• Fittings Kits – N2/CO2 version & O2 version
• On site installation & training by our installation engineers

To get the most from a MAP Mix Focus, we offer the following options:

• IP 54 Stainless Steel Enclosure for use in both wet & dusty environments
• Warranty Upgrade
• Annual Service Contracts and Preventative Maintenance Contracts.

MAP Mix Focus or MAP Mix Provectus – which best suits your requirement?